February 09, 2011

Gekko unveils bright soft light

Gekko Technology is showing the latest additions to its lighting range at BVE, including the kezia 200-E colour tunable hard-source, the kezia 200F white-optimised LED hard source, and karesslite 6006-DD high output soft light.


The new karesslite 6006-DD high-brightness soft light (pictured) has twice the number of emitters and hence twice the brightness of the standard karesslite 6006. Available in daylight (5600K) and tungsten (3200K) versions, it incorporates a 6x12 emitter format in a 300x300mm panel with a front-to-back depth of 165mm and a weight of 4.8kg including diffuser.

It delivers the same 2600 Lux at 1m brightness as the 600x300 mm karess 6012 and can be used as a key light (with louvre) or fill, with consistent colour through the dimming range.

Power consumption is 85W, allowing more than 90 minutes of continuous operation from a single rear-mountable V-Lock battery. Power can also be derived from a 12 to 40v DC feed via an XLR 4 connector, or from a mains supply. It has on-board dimming and integrated DMX.


The recently introduced kezia 200-E (pictured) gives dynamic control of colour output without the need for gel. Based on Gekko's award-winning kleer-colour LED multi-chip array, it combines high quality output, long component life, creative versatility, low power consumption and minimal heat generation. Users can generate colour effects that are consistent from lamp to lamp, thanks to the closed-feedback loop that constantly monitors and corrects the light temperature. Controllable via DMX or an optional rear panel, the kezia 200-E can be adjusted manually or remotely to produce millions of colours.

Drawing less than 200 Watts of power, the kezia 200-E has an output roughly equivalent to a 1 kW tungsten fixture.

Also relatively new is the kezia 200F, a white-optimised LED spot lamp, with presets for of 2900, 3200, 4300, 5600 and 6500K via DMX or optional rear panel. Colour temperature remains constant when the light is dimmed, as ambient conditions change or as the unit ages.

Interchangeable optics provide beam angles of 20º, 40º or 60º. Output intensity is 8300 Lux at 1m, 1900 Lux at 2m and 900 Lux and 3m.

By David Fox

Octica sees The Light on LEDs

Octica Professional has been chosen as exclusive distributor for the UK and Ireland for Thelight's new advanced LED lighting systems, which it will be showing at BVE 2011 next week in London.

Thelight's LED lighting is claimed to offer "absolute lighting control over colour temperature, light intensity and beam direction".

It is available in three formats for both studio and location use, with each model being slim, lightweight, compact and rugged, using ultra-high-output, long-life, low power consumption LEDs that are claimed to give "superior lighting and accurate colour temperature control compared to panel type LED lighting systems."

They use a combination of optical, electronic and thermo-mechanical engineering coupled with direct input from the LED manufacturer, to make lighting easier and faster to set up, with no need for correction gels due to the patented digital variable colour temperature control, dimmer and green/magenta bias. An articulated structure enables instant focusing or flooding of the light beam while the LEDs are supported by specially designed Fresnel lenses that focus and blend the LED beams to deliver a "soft but fully directional light".

The control unit allows digital adjustments of colour temperature calibrated in 100K increments from 2800K to 8500K while light intensity remains constant, stable digital dimming is calibrated in half stop increments.

The initial three-model line up can deliver a high light output: with 10,000, 9,000 or 5,500 Lux at one metre.

Related post: Thelight articulates case for LEDs

By David Fox

Rycote boom poles go graphite

Rycote has introduced three new lightweight, telescopic carbon-fibre audio boom poles. The 1.63-metre-long G3, with three sections, and the 2.49-metre-long G5, with five sections. The G5 comes in two versions, a standard pole and one with an internal coiled cable and built-in Neutrik XLR connector in the hilt (pictured).

For several years, following its takeover of US boom pole manufacturer Lightwave Audio, Rycote has been selling telescopic boom poles under the Lightwave name. However, with the launch of the Rycote-branded G-series carbon-fibre poles, the entire range, including the A3 and A5 aluminium poles, will now be rebranded as Rycote products - Rycote is probably best known for its shock-mounts and windshields (we use a Softie on our gun mic).

The G-series poles use the same lightweight, patented, triple-cam grip and twist locking system as the A3 and A5 poles, and with no metal parts to add to their weight combine lightweight construction with tensile strength. As on the A3 and A5, the locking mechanism is designed to be resistant to jamming when the pole is dirty; however, if necessary, the locking collars can be completely stripped down for cleaning in the field if required. The G3 weighs just 360g, the standard G5 is 580g, while the G5 with internal cable weighs 720g - if you are holding a boom mic over your head for a long take, any weight saving is appreciated, and having the built in cable is one less thing to worry about or hear flapping in the wind....

List prices are G3: £150; G5 Standard: £204; and G5 with internal cable: £288, including VAT.

By David Fox

Røde’s VideoMic goes Pro

The original Røde VideoMic is widely used for video production, and is a particular favourite for HD DSLR users. Now there is a VideoMic Pro offering new features specific to professional video.

Noise transference has been significantly reduced using both a revised, more elegant shock mounting system and a lightweight premium cable.

The VMP is smaller (15cm long), weighs 85g, and is also centrally balanced, making it mosre suitable for use in conjunction with low-cost camera stabilisation systems.

It has a super-cardioid condenser microphone, integrated foam windshield, 3.5mm stereo mini-jack output (dual mono), two step High Pass Filter (flat, 80Hz), three-position level control (-10dB, 0, +20dB), uses a 9v battery offering up to 70 hours battery life (alkaline). It has a camera shoe mount with 3/8-inch thread for boompole mounting, and comes with a DeadCat VMP furry windshield.

It will be on show at BVE 2011 on stand C-44 (www.sourcedistribution.co.uk).

By David Fox

Wireless audio without interference

Shure’s upcoming Axient Wireless microphone system is claimed to be the first wireless system to both detect interference and automatically change frequencies to avoid interference.

“Uncertainty and volatility in the RF spectrum are the new reality for professional wireless users,” explained Sandy LaMantia, Shure's President and CEO. "They face increasing pressure to deliver interference-free performance even though conditions are more unpredictable than ever before. The Axient wireless system was designed from the outset to withstand interference from the analogue and digital sources that exist today and may exist in the future.”

The Axient system employs several new innovative technologies that work together to deliver interference-free audio at critical events, such as live broadcasts.

“Axient defines a new standard for control and confidence in applications with zero tolerance for failure,” added Erik Vaveris, Category Director for Wireless Products at Shure. “This is the first wireless microphone system that can detect interference and avoid it automatically. Today, when unexpected RF interference arises, an engineer is either stuck with dropouts or they can run a backup mic out to the performer. Axient makes that a thing of the past.”

Features include: Frequency Diversity, which transmits full-bandwidth audio on two separate frequencies to ensure seamless, uninterrupted audio for mission-critical channels, even in the face of direct RF interference; ShowLink remote control, which enables the user to make real-time remote adjustments from the receiver or a laptop, of transmitter settings like audio gain while the microphone is live; Axient Spectrum Manager, which constantly scans the RF environment, performs frequency compatibility calculations to assign clear frequencies to each wireless transmitter, and deploys backup frequencies automatically; Smart lithium-ion rechargeable battery packs; and Wireless Workbench 6, a new software interface that enables users to monitor and control the entire system.

“The Spectrum Manager functions as an air traffic controller for the system,” said Vaveris. “When the receiver’s Interference Detection & Avoidance feature senses interference, the Spectrum Manager assigns a new frequency that it knows is clean. The frequency is deployed to the transmitter by the ShowLink wireless access point, and the transmitter and receiver execute a synchronized frequency change in a matter of milliseconds, making it virtually undetectable. And with Frequency Diversity enabled, there is no audible trace whatsoever.”

The Axient Wireless microphone system will be available in mid-2011.

By David Fox

OConnor CFF-1 follows focus

OConnor's new CFF-1 Cine Follow Focus features modular construction that eliminates the need to juggle separate bridge plates.

The CFF-1 has the lowest clearance available in a double-sided studio unit, and sports a large diameter lens-friendly design. It integrates with existing accessories such as whips, gears, cranks, and is designed to be both camera versatile and to accommodate future accessories.

Another recent innovation is OConnor's O-Grips Handgrip system. They feature single-handle ball joints with high-load capacity, and a rod bridge that fits all three rod standards. The modular O-Grips are stackable for custom applications and can be configured to create double or even multi-joint handles. Each grip is fully adjustable and is capable of a half sphere of stepless articulation. By combining two grips, the range can be extended to a complete sphere.

The new O-Box WM mattebox (pictured) is designed for 16:9 format full-size sensor camera setups, including HD DSLRs. It is compact and accommodates lenses up to 18mm in focal length; some wider. The mattebox can mount up to three filters: two in top-loading filter frames (two each 4x4-inch and 4x5.65-inch, frames included), with the rear frame rotatable through 360º. A third 138mm round filter fits in the optional bellows ring. O-Box WM is claimed to be the first commercially produced mattebox to have integrated handgrip interfaces.

OConnor is also showing its new 2065 Fluid Head at BVE. It is designed for cameras like the Red One, Sony F35, and Arri Alexa. Features include: stepless, ultra-smooth pan and tilt fluid drag, and sinusoidal counterbalance that provides, accurate balance at any tilt range point.

By David Fox

Compact camera controllers

Camera Corps will introduce new Switchpad and Mini Joystick controllers at BVE 2011 in London next week, as part of programme production system that includes its Q-Ball robotic cameras.

Switchpad is a multi-camera control unit which increases from five to 96 the number of remote camera heads that can be operated via the company's Joystick Control or CCU Panel. It can also be used with Camera Corps' Multi Camera Combiner unit to allow up to four Joystick operators and up to four CCU engineers to control the 96 cameras and pan & tilt heads simultaneously using just a single data line.

It can drive different types of video router, enabling the picture monitor to follow camera selection at any of the eight operator positions. Up to 255 channel numbers and routing-matrix assignment numbers can be selected via the keypad for easy integration of the 96 sources with existing camera channel configurations on video matrices with up to 256 inputs.

Switchpad is compatible with many different types of camera as well as the Q-Ball. Connection is via a robust interface, which encodes control data onto a standard audio line at user-selectable bit-rates.

The Mini Joystick Control has been developed for applications such as commentator-camera control or OB vehicles with restricted space, the compact controller is compatible with Camera Corps and Egripment pan and tilt heads. The joystick and control buttons have the same tactile responsiveness as those on Camera Corps' full-size controller, including fully adjustable pan, tilt and zoom speeds and reverses. Zoom is controlled by rotary twist of the joystick. Up to five separate heads can be operated from a single panel. Reverse settings and control speeds for each of the five channels can be stored in non-volatile internal memory."

Camera Corps' generic audio data communication system is employed to allow unlimited operating distances between Mini Joystick Control and the remote heads. Each of the five channels has its own red and green cue/tally light switch. Individual channels can be locked to prevent inadvertent alteration of presets. Focus can be remote-adjusted manually or switched between manual and automatic when used with cameras that support these features. Mini Joystick Control operates from 9v to 18v DC power adapter or battery. Total panel dimensions are 190x140x110mm. Weight is 400g.

By David Fox

January 27, 2011

Cel-Soft 3D depth chart generator

A new addition to the Cel-Scope3D stereoscopic analyser will be introduced by Cel-Soft at BVE 2011 in London (15-17 February).

The automatic logging option will generate a printable report of depth budget and depth plot for easy reference by cameramen during a shoot or by editors during 3D post-production.

"A depth chart is essential for all but the shortest 3D productions," explains Cel-Soft Managing Director, Robin Palmer. "Creating such charts manually is tedious and time-consuming as the stereographer needs to go through each scene and measure the disparity range used for the principal foreground and background objects and points of attention. These must then be marked as coloured lines on a paper chart against timecode. The reason is to prevent jump cuts that are visually objectionable even if within the actual depth budget.

"An example would be three short scenes where the front-most object in shot one is not present at all in shot two, followed by shot three in which the most front-most object is a lot further back than in shot one. Viewers' eye muscles must be allowed time to shift attention from one shot to the next. It is also advisable to give viewers opportunities to relax their eyes during the course of a 3D programme. For these and artistic reasons, a depth script needs to be prepared as part of the storyboarding for a big production."

The new logging option for Cel-Soft's Cel-Scope3D stereoscopic analyser generates a depth chart automatically. It logs against timecode the maximum and minimum depth values employed, together with the range in use. These measurements can be shown either in percentage of screen width or in horizontal pixels. A cursor can be placed on any object of interest or point of attention for a instant measurement of that spot's disparity and hence depth."

Cel-Scope3D is designed for use on set with live inputs as well as for reviewing and playing back 3D media files during post-production. Available as a complete system or as Microsoft Windows-compatible software, it allows stereoscopic camera alignment to be performed quickly; ensuring 3D is accurate from the moment of capture. Footage and edits in a wide range of file formats can be viewed and assessed in real time. Disparities are analysed and displayed as intelligible graphics on 2D or 3D monitors. Anaglyph display, touch-screen control and auto-alarm are all supported.

Cel-Scope3D displays can be scaled and arranged as six or eight windows on one or two PC monitors and on a 3D monitor. Left and right channels can be viewed simultaneously together with actual depth dynamics. Each display window can be set to show waveform, vectorscope and histogram graphics as well as differences in video parameters between each channel. Geometry issues can be identified easily using built-in real-time image manipulation. Quality-control tests can be performed on live stereoscopic video sources in any SD, HD or 2K format from industry standard capture cards or FireWire inputs, or alternatively from file playback.

Related post: Cel-Soft limits the scope of bad 3D

By David Fox

January 26, 2011

Sky endorses Technicolor Certifi3D

Technicolor's new 3D certification programme, Certifi3D, has been endorsed by content owners and network operators, including BSkyB. The certification programme is geared towards broadcasters, network service providers and content owners, with the goal of delivering quality and comfortable 3D experiences to viewers.


Sky 3D - setting the standards from UrbanFox.TV.

“As the first operator in Europe to launch a 3D channel, Sky is at the forefront of both capturing and commissioning 3D content for broadcast on its platform. Sky aims to provide our customers with the very best quality and value 3D content across movies, sports, drama and the arts,” said Chris Johns, Chief Engineer, Broadcast Strategy at BSkyB (video above). “We therefore see a clear need for innovations like Technicolor’s Certifi3D service that will help the creative community to deliver consistently high quality and safe 3D content, which will in turn maximize the comfort and enjoyment of the 3D experience for our customers.”

Certifi3D was demonstrated at the recent Consumer Electronics Show in Las Vegas, Nevada, and was created to ensure that 3D material meets minimum comfort requirements before it is delivered to consumers. As part of the service, Technicolor evaluates each shot against a set of objective criteria for stereographic reproduction, including a 15-point quality checklist to identify common errors in production that result in suboptimal 3D content. The company will also offer training to broadcasters and content creators to help them migrate their production and post-production techniques from traditional television to the three-dimensional medium.

“We are very excited that BSkyB is endorsing our 3D certification program,” said Pierre Routhier, Technicolor’s VP for 3D product strategy and business development. “Together with our customers, we will take a proactive approach in support of the industry to ensure a consistent and quality end-consumer 3D experience in the home.”

By David Fox

3ality Digital + Arri Media join forces

Arri Media is to supply 3ality Digital's active stereoscopic 3D shooting systems to the UK’s TV and film market.

The new partnership will expand equipment availability, as 3ality Digital’s systems will be available to rent direct from Arri Media’s London and Manchester bases.

Content producers will also be able to demo or test the systems in one of the six Arri Media test rooms, at its offices in Uxbridge. There they can gain familiarity with 3ality Digital’s technology and ensure that it meets their requirements.

The agreement will also see Arri Media becoming the UK service centre for 3ality Digital’s products.

“Arri Media has over 20 years’ experience working closely with some of the biggest names in the UK’s film and TV industry, so they provide the perfect platform to expand the availability of 3ality Digital’s products. They fully understand advanced digital technologies, have industry-recognised technicians and support and are the perfect partner for us on this side of the world. Arri Media has a stellar reputation and we look forward to working closely with them," said Steve Schklair, CEO of 3ality Digital.

The systems are already in regular use in the UK. BSkyB uses 3ality Digital equipment for acquisition for its 3D HD satellite channel, since using it on its first S3D broadcast, the Manchester United v Arsenal football game in January 2010.

“3ality Digital’s reputation for being the best in the 3D industry has been built on the quality of their products, which are at the heart of S3D. The company is capable of equipping at the highest level in the S3D world and together with Arri Media’s camera and grip range, we will be able to provide customers with complete S3D production solutions," said Bill Lovell, Head of Arri Media's Digital Department.

Arri Media recently supplied 3ality rigs to SK Telecom, Korea, to shoot Mozart l’opéra rock (Mozart – the rock opera) in Paris, using six 3D rigs (and an OB truck from Euromedia) at the Palais des Sports to capture the event, initially for cinemas across Europe then for global release. It also supplied 3ality rigs and Alexa cameras for a shoot in London, featuring the dance group Diversity, for Sky 3D.


Steve Schklair on the HD to 3D transition from UrbanFox.TV.

By David Fox

3D specialist Pointy Stick launched

A new creative-driven 3D production company has been established by 3D production services and tech company Inition and director/creative technologist Michael Lindsay.

Pointy Stick is representing a roster of emerging talent and brings together original, creative minds from around the world, all of whom are already successful in 2D but are forging new paths in stereoscopic 3D work.

Pointy Stick’s commercials director roster includes Fredrik Callinggard whose Ikea commercial, Kitchen Dreams, won a Gold Lion at Cannes in 2006; Gaute Hesthagen who has a track record in high-end film and commercials; founder Michael Lindsay whose 3D work includes live event content for Unilever brand TIGI and a series of 3D films for De Beers; Mike Brady, who works across music, commercial and corporate video and recently directed a 3D ad for Royal Mail; and award-winning wildlife duo Deeble & Stone who recently collaborated with Inition to produce a 3D pilot for their feature film Distant Thunder.

“Pointy Stick stands out in the field for having both creative credibility and fantastic 3D technical credentials under one roof," claimed Inition director, Andy Millns. "We have the crucial technological lineage and support built up in Inition, which is a major defining asset. The most exciting thing about this new venture however, is that we now have the framework in place to focus on expanding the creative parameters of what is possible in 3D.”

“Creatively, this is an exciting time to be working in 3D as most of the defining pieces of the medium are yet to be made," added Michael Lindsay. "There is very little creative precedent to lean on which makes 3D a challenging medium to work with but one with huge potential. Bold, innovative and creative S3D films are our primary interest.”

Lindsay and Millns first worked together on series of 3D films for a global launch event in Las Vegas in 2006. Since then the pair have collaborated on a number projects. Pointy Stick has already completed work for DeBeers (for a no glasses display at its London and New York stores - pictured), LG and Unilever and shot pilots for music and documentary projects.

By David Fox

3D One upgrades CP31 3D camcorder

3D One has upgraded its CP31 3D HD camcorder with native QuickTime, has started deliveries in the US, and has had the CP31 used for filming rockets in French-Guyana.

Its latest, free software update allows the CP31 3D HD camcorder to directly write .mov files. The recordings are stored in two photo-JPEG encoded QuickTime files, which are natively supported by any Mac application, such as Final Cut Pro. It can also directly write AVI files, which are more commonly used on Windows computers.

The 3D One cameras are already available in Europe, at Alphatron, more2cam, or Visual Impact, and are now being delivered to US rental companies such as t-stop in LA.

The European Space Agency has recently been filming with the CP31 in the tropical heat of French Guyana, recording the integration of its Advanced Transfer Vehicle into the Ariane 5 rocket. This is part of the production of a 3D film to be projected for large audiences across Europe.

By David Fox

Panasonic adds 1080/24p to HC1800

Panasonic has upgraded its multipurpose 2/3-inch 3CCD AK-HC1800 camera to make it more suitable for 3D and episodic production.

At CES, Panasonic demonstrated two HC1800 cameras delivering 1080/24p in a Bexel 3D rig.

The compact 1.5kg HC1800 has been deployed for a wide variety of uses in studios, sports and entertainment venues, and can now shoot 24p (where previously it was 50i or 60i only).

It incorporates an advanced single-channel transfer system and spatial offset processing to reduce aliasing and provide finer resolution, has a useful signal-to-noise ratio of 60dB and sensitivity of F10 (at 2000 lux).

Other features include: 14-bit A/D converter with a 38-bit digital signal processor; 12-axis colour correction; CineGamma; Dynamic Range Stretch; HD-SDI output; genlock; mini 15-pin connector for power and control, tally function, iris and zoom/focus controls; motor driven optical filters (Clear, 1/4ND, 1/16ND, 1/64ND); DC 12v operation; and power consumption of 17W.

The AK-HC1800 with 24p output will be available soon at a list price of $29,900.

By David Fox

January 25, 2011

Century goes wide for XF300/XF305

Century, part of Schneider Optics, has released a new HD Wide Angle lens attachment for the popular Canon XF300 and XF305 camcorders.

The new WA-8XLC-XF Wide Angle Converter attaches directly to the front of the camcorder's built-in 18x zoom lens to increase viewing coverage by 20%. Recent approval from the BBC for HD broadcast production has increased demand for the XF300/XF305, but at 29.3mm (35mm lens equivalent) at its widest, it doesn't have a particularly wide-angle lens.

In operation the Century .8x Wide Angle Converter will allow full zoom functionality, providing a 20% increase in coverage through the entire zoom range.  The WA-8XLC-XF is claimed to offer: "superior edge-to-edge contrast with low distortion and chromatic aberration." The adapter has a bayonet mount that fits directly to the front of the lens with a twist and lock mechanism, and should take just a few seconds to attach.

Further lens accessories for the XF300/XF305 are being developed by Century and should be available shortly, including a .6x HD Wide Angle Adaptor, Fisheye HD Adaptor and 1.6 HD Tele-Converter. Its UK and Ireland distributor is IDX Technology, and the WA-8XLC-XF is available for about £750.

By David Fox

Mighty Atom ready for 3D Epic


Atom 3D RED Epic Rig - Tour by Stephen Pizzo from Tonaci Tran.


Element Technica has developed a new 3D rig especially for Red's latest Epic digital cinema camera. The Atom will cost from $64,000.

Because it has been designed for a specific camera, ET could make it lighter and more streamlined. It will initially be available in aluminium (weighing about 8kg in handheld configuration), but a $84,000 magnesium version will be available soon that weighs less than 6kg – meaning that a complete 5K 3D beamsplitter rig would weigh about 16kg for a handheld system - as little as some 35mm camera systems.

The Atom can have integrated lens control, interocular and convergence control, genlock synch, a 3D multiplexer, and an Epic-specific IO module. It can integrate with the same $12,500 cine-style lens control available for ET's Quasar, Pulsar and Neutron 3D rigs – the Pulsar has just started full production.

The multiplexing, sync and power conditioning electronics come as part of the $20,000 Atom Pro Kit (which is made of magnesium in a shark's fin-style housing), meaning it has three fewer external components. The Pro Kit also includes two 3D IO modules designed for use with Epic to replace up to four cables per camera, and 12 or more cables from the rig.

Although it is relatively compact, Atom can still accommodate full-sized PL and PV primes as well as smaller zooms like the Angenieux Optimo 16-42mm or 30-80mm.

For Steadicam use, it allows almost 120º of pan rotation (thanks to a very low profile bottom camera plate), which is more than other rigs available; if using primes and a shorter dovetail, full 360º rotation is possible (as on the Neutron rig).

Specifications: IO travel (beamsplitter mode) is 0-90mm, or 95-190mm in side-by-side mode; convergence is 1.2m at 90mm; beamsplitter field of view is 65° (with an 85mm lens front). Height (studio mode) is 520mm, or 445mm in handheld mode; length is 480mm (beamsplitter mode); width ranges from 216mm to 430mm.

By David Fox